Toolots Reviews 2020


Founded in 2016 Toolots resells extremely cheap made-in-China machines and equipment. With a location in Cerritos, CA Toolots ships from multiple US locations with the aim to quickly distribute their China imports.

Reviews are mixed with service, support, and order fulfillment being an ongoing area for improvement. Currently after sales support outside of a call center may not be free unless you fall back to a support forum – more on that later…

NOTE: As with most China engineered, built, and QA’d machinery the money saved on the front end is often lost after the sale. You can and should expect to handle much of the support or component failures – on your own. In many instances receiving the machine in good working order without damage or delay is a challenge. But, more often than not you will need to be patient with ongoing repairs, replacement parts. and warranty claims.

Toolots repairs, replacement components, and help?

Toolots online store gives merchants and B2B buyers an option to buy their equipment in small or bulk quantities. Most likely for the purpose of resale. The goal is to resell high volumes of machines, tools, and equipment quickly. Toolots does have an impressive variety of machines offered from different China suppliers. Often the same or similar machines are manufactured by multiple suppliers. Altogether how can a company with roughly 50 employees really support thousands of different machines from different suppliers all with their own unique hardware, software, etc?

Obviously they can’t – and they don’t.

Instead Toolots “After Sales” service provider option is relegated to a 3rd party web portal: “Yuutool”. (Actual responses to questions below).

Yuutool gives Toolots the ability to forward customers to hire 3rd party regional service providers for support. Currently these freelancers’ service/repair rates range between $40 – $300 per hour depending on the warranty and the machine in question. Each provider is unique and specializes in a specific discipline or field of expertise.

Yuutool’s ‘Service Provider’ locator map currently shows a total of 6 provider locations across the USA. (California, Oregon, NW Texas, Tennessee, South Carolina, and New York). I am sure they are working to add as more providers come available.

Red FlagRed Flags:

Currently, out of a total 56 ‘service provider’ profiles a many display incomplete or zero info for a customer to even make contact? Others providers state they only service within a 10 mile radius. And if by chance there is a provider near a customer what are the chances he has even operated let alone the knowledge to service the machine needing serviced?

So, if you’re a small business relying on Toolots to deliver you a machine specific part or a time sensitive service provider for a downed machine – you might be disappointed.

Actual Service Providers:

YuTool also has a start up support forum; however, again with all the various equipment they support finding helpful troubleshooting service support is limited, unlearned, and even outright dangerous. Toolots’ hobby laser cutter sales support within their forum offered the following support:


Q: “Can a 40W CO2 laser cut paper? IF so is there a bed to lay the paper on or how would you support/hold the paper in place during the cutting process?”

A: support forum: “I think it can cut paper, but it may burn the paper depending on how flammable the paper is.

If you have experience with a CO2 laser you know laser cutting paper is common. Securing it to the platform is a non-issue. As long as your power is set low and your speed is up a laser will cut through it without burn marks – easily.

This next forum answer actually needs to be removed before someone gets seriously hurt…

Laser Cutting PVC

Q: I have some PVC sheets and want to make cut outs to paint and turn into wall sculptures. I want to get a Laser Engraver but haven’t really used one before. What should I get?

A: “You may want to try looking at your material, is it a consistant material that you will be using? How thick is this material? How many do you want to make within what time frame?

Q: The PVC sheets are about 1/4″ thick and prob only need to make about one or two a day to start with. If they are successful I’d up it to 5- 6 a day. This material seems to be the best with durability.

A: ok, so check out lasers around 50-60watt, They’re a decent speed and will work for the thickness you’re looking for, also you won’t need to upgrade if they’re successful.

5/20/2019 1:48 p.m.

What Toolots respondant doesn’t realize is that even though PVC or polyvinyl chloride can in fact be cut with laser, it is also dangerous when heated. The thermal process produces hydrochloric acid which emits toxic fumes (chlorine gas). You can die from inhaling too much Chlorine gas! This customer had never used a laser before and sales never warned him about laser cutting PVC? This is an example of selling machinery out of ignorance that could prove fatal.

Support forums especially ones like this tend to be hit or miss for those seeking real help to get their machine up and running. Unfortunately, this forum support seems to be needing support of its own.

Product reviews, complaints, and honest feedback from customers and employees can be found using the links below. Please help our readers by contributing your honest feedback in the comment section below.

Toolots CEO (also founded Bolton Tools)

Employee reviews

Facebook Reviews

Ripoff Report

Google Reviews:

Return Policy

Toolots laser cutter review

Hours of Operation:

After Sales Support – “Service Providers” are located in a limited number of states (I counted 7). Service providers, videos, and forum support can be located and evaluated via. their 3rd party “After Sales” website:

Share Buttonvar hupso_services=new Array("Twitter","Facebook","Linkedin","StumbleUpon","Reddit","Print");var hupso_icon_type = "labels";var hupso_background="#EAF4FF";var hupso_border="#66CCFF";var hupso_image_folder_url = "";var hupso_url="";var hupso_title="Toolots%20Reviews%202020";